• - 300 MHz MIPS Processor
• - Linux Operating System
• - OLED - Display
• - MPEG-2 / H.264 Hardware decoding
• - Tuner: DVB-S, optional: DVB-C, DVB-T
• - Tuner Module, Plug&Play
• - 1 x Smartcard-Reader
• - V.24/RS232 Interface
• - 10/100Mbit Ethernet Interface
• - 1 x Scart (RGB, FBAS or S-Video)
• - DVI
• - 2 x USB 2.0
• - analog modem
• - S/PDIF Interface for digital bit stream out (AC-3)
• - 64 MByte Flash, 256 MByte RAM
• - SATA
  • - for use either as internal SATA HDD 2,5“
  • - or to use for extern eSATA
  
  
   
• - unlimited channel lists for TV/Radio
• - channel-change time < 1 second
• - automatic service scan
• - directly bouquet-lists
• - EPG (electronic program guide)
• - multiple LNB-Switching control (supports DiSEqC)
• - OSD in many languages and skin-support
• - Videotext Decoder
• - extern 12V power supply

DreamBox DM800 technical data

DBS-Tuner mit DVB-S2:

 

• Frequency Range 950 .... 2150 MHz
• Demodulation DVB-S (QPSK); DVB-S2 (8PSK,QPSK)
• Symbol rate DVB-S: 2 ... 45 Mbaud/s, SCPC/ MCPC
• DVB-S2: 10 – 31 Mbaud/s (8PSK) , 10 –30 Mbaud/s (QPSK)

Video decoder:
 

• Video Compression MPEG-2 and MPEG-1 compatible, H.246
• Video Formats 4:3 / 16:9
• Letterbox for 4:3 TV-Device

Audio decoder:
 

• Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3
• Audio Mode Dual (main/sub), Stereo
• Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

Output analog:
 

• Output Level L/R 0,5 Vss on 600 Ohm
• THD > 60 dB (1 kHz)
• Crosstalk < -65 dB

Output digital:
 

• Output Level 0,5 Vss on 75 Ohm
• Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
• S/PDIF-Output optical, Toslink

Ausgang Video:
 

• Ausgangspegel FBAS 1 Vss +/- 0.3 dB an 75 Ohm

Video parameter:
 

• Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
• Teletext filter in conformity with ETS 300 472 Standard

TV-Scart:
 

• Output: FBAS, RGB, S-Video

Serielle Interface RS 232:

• Typ RS232 bidirectional
• Bitrate 115,2 kBit/s max.
• Plug Connector SUB-D-9
• Function: Update of Firmware

Ethernet:
 

• 10/100 MBit compatible interface
• Function: Update of Firmware

Analoge modem:
 

• analoge modem for Internet connection

SATA Interface:
 

• - for use either as internal HDD 2,5“ or eSATAor internal 2,5" HDD

USB
 

• 2 x USB 2.0 Host

LNB power and polarisation per tuner:
 

• LNB Current 500mA max.; short-circuit-protected
• LNB Voltage vertical < 14V no load, > 11,5V at 400mA
• LNB Voltage horizontal < 20V no load, > 17,3V at 400mA

Count of active satellite position:
 

• DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
• DiSEqC - Rotor Control

Power consumption:
 

• < 15W at 12V

External PSU
 

• Input:
  110-240V AC / 50-60Hz / 0,6A
• Output:
  12V = / 3,0A

Physical specification:
 

• Ambient Temperature +15°C...+35°C
• Humidity < 80%
• Size (W x D x H): 195 mm x 140 mm x 40 mm 
•    without HDD